RegViz: Visualize CSR Bitfield

Renesas Electronics /R7FA6T2BD /SCI_B0 /CSR

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as CSR

DFER=0, RXDMON=0, ERS=0, ORER=0, DPER=0, DCMF=0, MFF=0, RDRF=0, FER=0, TDRE=0, TEND=0, PER=0

Description

Common Status Register

Fields

ERS	Error Signal Status Flag 0 (0): Error signal Low not responded 1 (1): Error signal Low responded
RXDMON	Serial input data monitor bit 0 (0): When RINV is 0, RXDn pin is the Low level. When RINV is 1, RXDn pin is the High level. 1 (1): When RINV is 0, RXDn pin is the High level. When RINV is 1, RXDn pin is the Low level.
DCMF	Data Compare Match Flag 0 (0): No matched 1 (1): Matched
DPER	Data Compare Match Parity Error Flag 0 (0): No parity error occurred at address match detection 1 (1): A parity error has occurred at address match detection
DFER	Data Compare Match Framing Error Flag 0 (0): No framing error occurred at address match detection 1 (1): A framing error has occurred at address match detection
ORER	Overrun Error Flag 0 (0): No overrun error occurred 1 (1): An overrun error has occurred
MFF	Mode Fault Flag 0 (0): No mode fault error 1 (1): Mode fault error
PER	Parity Error Flag 0 (0): Non-FIFO selected (CCR3.FM = 0): No parity error occurred FIFO selected (CCR3.FM = 1): No parity error in all received data in receive-FIFO 1 (1): Non-FIFO selected (CCR3.FM = 0): A parity error has occurred FIFO selected (CCR3.FM = 1): One or more parity errors occurred in received data in receive-FIFO
FER	Framing Error Flag 0 (0): Non-FIFO selected (CCR3.FM = 0): No framing error occurred FIFO selected (CCR3.FM = 1): No framing error in all received data in receive-FIFO 1 (1): Non-FIFO selected (CCR3.FM = 0): A framing error has occurred FIFO selected (CCR3.FM = 1): One or more framing errors occurred in received data in receive-FIFO
TDRE	Transmit Data Empty Flag 0 (0): Non-FIFO selected (CCR3.FM = 0): Transmit data is in TDR register FIFO selected (CCR3.FM = 1): The quantity of transmit data written in transmit-FIFO exceeds the specified transmit triggering number. 1 (1): Non-FIFO selected (CCR3.FM = 0): No transmit data is in TDR register FIFO selected (CCR3.FM = 1): The quantity of transmit data written in transmit-FIFO is equal to or less than the specified transmit triggering number.
TEND	Transmit End Flag 0 (0): A character is being transmitted or standing by for transmission. 1 (1): Character transfer has been completed, or sending Break Field.
RDRF	Receive Data Full Flag 0 (0): Non-FIFO selected (CCR3.FM = 0): No received data is in RDR register FIFO selected (CCR3.FM = 1): The quantity of receive data written in receive-FIFO falls below the specified receive triggering number. 1 (1): Non-FIFO selected (CCR3.FM = 0): Received data is in RDR register FIFO selected (CCR3.FM = 1): The quantity of receive data written in receive-FIFO is equal to or greater than the specified receive triggering number.

Links

() ()